1. Inkjet Lenticular Posters -A3 up to 1.2 x 1.8 m (W x H)
Lenticular plastic: APET 40 LPI (Lenticules Per Inch); 1 mm thick.
Lenticular print 1 side (front): Motion, 3D, or hybrid effect. Reverse printed in full colour (CMYK) UV inkjet ink direct to plastic.
Backside finishing: White SAV (Self Adhesive Vinyl – lightbox type also available). Rigid poster option available for an additional fee -mounted to 4.5 mm acrylic sheet.
Artwork: Customer supplied files. Complex 3D designs may attract a surcharge -to be assessed upon sighting artwork.
Production: Brisbane, Australia; up to ~2 weeks from final proof approval.
15 Sept. 2021: Scratches in the current batch of lenticular sheet at our Australian printing facility deems it unsuitable for high end art gallery projects. Therefore, Canadian production is indicated for such purposes.
Payment terms: 50% deposit due before work commences. Balance COD (before despatch).
Payment method: Bank Transfer.
Lens direction: Vertical for posters (effect changes left-to-right).
Maximum trimmed size: 1180 W x 1790 H mm printed in Australia.
Intended for indoor display, but may be used outdoors at buyer’s risk.
Ideal for Motion and subtle 3D effects.
297 x 420 (A3)
420 x 594 (A2)
594 x 841 (A1)
841 x 1189 (A0)
1,000 x 1,000
1,200 x 1,200
1,200 x //1,600
1,200 x //1,800
Effect changes in a left to right direction.
Above prices in Australian dollars ex. GST, per unit of the same design.
Shipping to be quoted separately; min. $50 + GST TNT Road Express.
Canadian Production -PhotogramTech Lenticular…
For deep 3D effects, Canadian production is recommended which uses a 20 LPI 3.5 mm thick acrylic lens. Maximum trimmed size of single panels =~1178 W x 2378 H mm. Murals can be achieved by tiling adjacent panels, but since the process involves laminating lens sheets to prints, it is only recommended for indoor use. Suitability of the design and size to be assessed. Allow CAD $2,000 per panel + shipping, duty (5%) & taxes when estimating such a project. Note that the mural service is currently suspended whilst assessment of new material is being undertaken.
For more information please refer to our FAQ page
2. Custom Run Offset Lenticular Printing
Custom run offset print production suits smaller format prints (up to A3 size). Order quantities generally commence at 2000 postcards, 1000 A5 cards, or 250 A3 posters. Prices start at ~$4,500 + GST for single sided full colour printing.
Lenticular sheets: Lenstar Plus 75 LPI 0.46 mm or Ecolens 100 LPI 0.35 mm.
Lenticular print 1 side (front): Motion, 3D, or hybrid effect in black & white or full colour (CMYK).
Backside print: Opaque white base, then optional black (K) or full colour (CMYK) print, plus matte or gloss varnish. One colour variable data printing is available depending upon the product and quantity.
Finishing options: Forme-cutting, die-cutting, creasing, glueing & folding, and backside mounting (e.g. all-over double sided tape, magnet, 1 mm natural rubber, 3 mm sponge, etc.).
Artwork: Customer supplied files. Multiple designs or complex 2D-to-3D conversions may attract a surcharge -to be assessed upon sighting artwork.
Proof: GIF or Quicktime movie + inkjet mockup print. High resolution Kodak black & white proof where applicable.
Production: Melbourne, Australia. Generally up to 3 weeks from final proof approval. Special finishing requirements may extend production time.
Payment terms: 50% deposit due before work commences. Balance COD (before despatch) unless 30 day terms.
Payment method: Bank Transfer.