Pricing

1. Custom run small format

Lenticular plastic: Lenstar Plus 75 LPI 0.46 mm / Ecolens 100 LPI 0.35 mm
Lenticular effect: One side, reverse printed UV offset direct to plastic in 4 colour process (CMYK) + all over opaque white.
Backside options: Leave white or print either 1 or 4 colour process + varnish (matte or gloss). 
Artwork: 1 design from customer supplied files. Complex 3D designs may attract a surcharge -to be assessed upon sighting artwork.
Proof: GIF or Quicktime movie + inkjet mockup print.
Production: Australian; up to 3 weeks from final proof approval.
Priced from:
~A$4,800 + GST printed 1 side (1pp) + delivery
~A$5,550 + GST printed CMYK on the reverse (2pp) + delivery

150 x 100 mm 4/0 (1pp):   1,000 @ $4.80 ea. / 2,000 @ $2.52 ea. / 5,000 @ $1.16 ea.
150 x 100 mm 4/4 (2pp): 1,000 @ $5.55 ea. / 2,000 @ $2.90 ea. / 5,000 @ $1.32 ea.

DL 4/0 (1pp): 1,000 @ $4.92 ea. / 2,000 @ $2.64 ea. / 5,000 @ $1.28 ea.
DL 4/4 (2pp): 1,000 @ $5.68 ea. / 2,000 @ $3.04 ea. / 5,000 @ $1.46 ea.

A5 4/0 (1pp): 1,000 @ $5.10 ea. / 2,000 @ $2.82 ea. / 5,000 @ $1.47 ea.
A5 4/4 (2pp): 1,000 @ $5.88 ea. / 2,000 @ $3.23 ea. / 5,000 @ $1.66 ea.

A3 4/0 (1pp): 250 @ $20.40 ea. / 500 @ $11.30 ea. / 1,000 @ $6.76 ea.

Pricing assumes lens direction is parallel to the long side for sizes DL, A5, and A3.
Prices in Australian dollars excluding GST.
Delivery not included.
Payment terms: 50% deposit due before work commences. Balance COD (before despatch).
Payment method: Electronic Funds Transfer (i.e. direct deposit).

2. Combined (Gang) run small format **Best value -long lead time**

Lenticular plastic: Lenstar Plus 75 LPI 0.46 mm / Ecolens 100 LPI 0.35 mm
Lenticular effect: One side, reverse printed UV offset direct to plastic in 4 colour process (CMYK) + all over opaque white.
Backside: Leave plain white or print either 1 or 4 colour process + varnish (matte or gloss).
Artwork: 1 design from customer supplied files -Flip, Layered 3D, Morph, Zoom, Video, or Animation.
Proof: GIF or Quicktime movie + inkjet mockup print.
Production: Dependent upon timing of the job/s it can be combined with.

150 x 100 mm: 1,000 units @ $3.10 per unit + GST

DL: 1,000 units @ $3.30 per unit + GST

A5: 1,000 units @ $3.45 per unit + GST

Prices in Australian dollars.
Includes delivery to 1 point metro Australian capital city by standard road express.
Payment terms: Prepaid.
Payment method: Electronic Funds Transfer (i.e. direct deposit).
Pricing assumes lens direction is parallel to the long side for sizes DL and A5.

3. Posters -A2 up to 1.2 x 1.8 m (W x H)

Lenticular plastic: APET 40 LPI (Lenticules Per Inch); 1 mm thick
Lenticular effect: One side, reverse printed UV inkjet (digital) direct to plastic in 4 colour process (CMYK) + all over opaque white.
Backside: White vinyl film laminate (backlit type also available). Rigid option available for an additional fee -backside aluminium composite board or acrylic panel.
Artwork: 1 design from customer supplied files. Complex 3D designs may attract a surcharge -to be assessed upon sighting artwork.
Production: Australian; up to ~2 weeks from final proof approval.

420 x 594 mm; A2    = from $815
594 x 841 mm; A1    = from $895
841 x 1189 mm; A0  = from $1,1125
1,200 x 1,200 mm    = from $1,190
1,200 x 1,600 mm    = from $1,340
1,200 x 1,800 mm    = from $1,415

Notes…
Prices in Australian dollars excluding GST.
Delivery not included.
Lens direction is vertical for posters.
Maximum width: 1200 mm
Intended for indoor display, but may be used outdoors at buyer’s risk.
Ideal for Flip, Motion, and subtle 3D effects.
For deep 3D effects, I recommend Canadian production on a 20 LPI 3.5 mm thick lens design. Single panels up to ~1.2 W x 2.4 H m. Murals (tiled adjacent panels) for larger formats. Quoted upon request.

For more information please refer to our FAQ pageLea